Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Leading 10 common forklift accidents ， forklift operation should take note of these matters ！.
Blog Article
Do not undervalue the forklift at the workplace. If the procedure is bad, there will certainly be severe crashes in minutes, and there are many mishaps entailing forklifts.
Case 1: The forklift freight blocked the motorist's view, and the individual ahead could not be found, causing a moving accident.
Situation 2: In order to keep the balance of the forklift when lifting heavy goods, the workers utilized their body weight as the counterweight, which almost triggered casualties.
Instance 3: The width of the forklift cargo surpasses the allowable width of the path and holds on the roadside shelf, which virtually causes an mishap.
Case 4: Forklift is speeding and surrender throughout a turn.
Situation 5: The forklift driver did not see the pedestrian, and the pedestrian did not observe the forklift.
Situation 6: The forklift lifts the personnel unlawfully, the forklift vehicle driver does not put on the seat belt, the forklift lifter drops and the motorist is crushed when the forklift rolls over.
Situation 7: The forklift motorist did not use a seat belt and fell from the automobile when it rolled over and was crushed.
Forklift procedure should pay attention to these issues ：.
Start.
1. Prior to starting, observe the environments, and after confirming that there are no obstacles that impede the safety of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic pressure ( atmospheric pressure) scale should be risk-free prior to starting.
3. When the forklift begins with a lots, the driver ought to initially confirm that the load is stable and reputable.
4. The start must be slow and stable.
Driving.
1. When driving, the height between the bottom end of the fork and the ground must be kept at 300mm-400mm, and the mast needs to be slanted backward. .
2. Do not lift the fork expensive when driving. When entering and leaving the job site or while driving, beware that there will certainly be no barriers in the sky. When the load is taking a trip, the fork must not be elevated too expensive, which will affect the stability of the forklift. .
3. After dumping, the fork should be lowered to the typical driving setting prior to driving. .
4. When transforming, if there are pedestrians or lorries nearby, the driving signal needs to be released initially. High-speed sharp turns are forbidden. High-speed sharp turns will trigger the car to lose side stability and topple. .
5. When the forklift is downhill, it is strictly forbidden to switch off the flame and slide, and it is forbidden to brake instantly while driving with loads unless there are special circumstances.
6. When the forklift is running, it must follow the website traffic rules in the factory and need to maintain a certain safety range from the lorry ahead. .
7. When the forklift is running, the load has to be in the lowest position that does not prevent the driving, and the gantry ought to be effectively tilted back. The lots will not be elevated except when piling or packing. .
8. The height of the tons should not block the vehicle driver's sight. In special scenarios, when the thing affects the forward vision, drive at a low speed when turning around.
9. It is restricted to activate the ramp, neither to drive across the ramp. .
10. The risk-free driving rate of the forklift in the factory location is 5 km/h, and it has to drive securely at a low speed when going into the production workshop area. .
11. When the forklift is lifted, lifted or driven, it is prohibited for workers to stand on the fork to hold items and play a balancing function. .
12. If problems are located, they will be repaired and reported in a prompt way, and they will never ever operate with illnesses or hide them.
packing and discharging.
1. When fork-loading products, the distance between both forks must be changed as needed to make the lots of both forks balanced and not manipulated, and one side of the product should protest the rack. .
2. It is restricted to deal with a solitary fork or utilize a fork top or draw. In special conditions, security indication must be set up to remind surrounding pedestrians. .
3. In the process of filling and discharging things, the forklift should be stopped with the brake. .
4. The rate of the vehicle should be sluggish and stable. Be careful not to roll the wheels on the dunnage, so as not to extend the rolled items and injure people. .
5. When utilizing a fork to fork the goods, the fork must be as deep as possible Stand-on Electric Pallet Stacker under the tons, and it needs to be noted that the fork idea should not touch other products or items. The lots ought to be stabilized with minimal back tilt of the gantry so that the lots does not glide in reverse. The mast can be tilted onward slightly when the load is reduced to allow for easy positioning of the lots and removal of the forks. .
6. It is forbidden to fork goods at high speed and collide with difficult things with the fork head. .
7. When the forklift is functioning, it is restricted for individuals to loaf the fork, so regarding stay clear of the collapse of the goods and harm people. .
8. Overloading is prohibited, and it is prohibited to make use of forks to raise personnel to take part in high-altitude procedures to prevent high-altitude dropping accidents. .
9. It is not allowed to use the brake inertia to slide, put, round or roll things. .
10. It is not enabled to use forks to select, transform pallet unload.
Leaving .
1. It is forbidden to leave the forklift when the things on the fork impend. Before leaving the forklift, you need to discharge the goods or lower the fork structure.
2. Pull the hand brake manage to dead or depress the hand brake switch.
3. The engine is switched off and the power is cut off. (Except for unique circumstances, such as the vehicle driver does not leave the car's view and does not exceed 1 minute).
4. Remove the trick. .
Forklift Operation Precautions.
1. Before and after the forklift operation, the look needs to be examined, and fuel, lubricating oil and air conditioning water need to be included.
2. Inspect the safety performance of beginning, running and stopping.
3. Check whether the lights and horn signals are full and effective.
4. During the operation of the forklift, check whether the pressure and temperature are typical.
5. After the forklift is running, the exterior leak must additionally be examined and the seals should be replaced in time.
Forklift Safety Operation Specifications.
1. You must inspect before leaving the cars and truck;.
2. When you run into someone before you throughout driving, you need to send out a signal at a distance of 5 m;.
3. The driving speed in the manufacturing facility does not surpass 5 km/h;.
4. When driving, the low point of the freight must be 0.3 m ~ 0.4 m in the air;.
5. The transforming must not be too sharp to stop the propensity of " cost-free turning";.
6. Running up and down the incline ought to be slow-moving and uniform, and no activating the slope is permitted.
7. Do not drive across the slope. When the gradient is more than 10%, the automobile ought to be driven in reverse when declining;.
8. When the forklift personnel carry the goods and progress, if they encounter huge or heavy items and go to the vehicle driver's line of vision, they should take the turning around workout
.
The "Eight Prohibitions" ought to be adhered to in the procedure.
1. Solitary fork operation is not enabled.
2. It is not permitted to lift the goods for cross country driving.
3. It is not permitted to grab the goods by turning over the pallet with the fork.
4. It is not enabled to straight shovel chemicals, flammables and various other unsafe chemicals with forks.
5. It is not allowed to use inertia force to get the goods.
6. It is not permitted to use braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to deal with the pallet or fork, and it is purely restricted to stand under the fork after the fork is elevated.
8. Do not drive side to side on inclines
.
Parking is not permitted under the list below conditions.
1. Curves, narrow roadways, train crossings;.
2. Areas with a longitudinal slope greater than 5%.
3. When there is an obstacle on one side of the road, the contrary side of the area with the Electric Forklift Truck for Warehouse same size as the challenge should be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：info2@onen.cn
Phone：+86 13827083844